Residential and Commercial Service

Heating and Cooling Canberra

Canberra’s climate runs hard in both directions. A properly installed reverse cycle system handles ducted heating and cooling on one electric circuit, no gas line, no second trade, no guesswork on the quote.

Rated 5 stars (100+ Reviews)

Request A Quote Today

Residential and Commercial Heating & Cooling Experts

Ducted Reverse Cycle or Split System

Ducted reverse-cycle air conditioning suits most Canberra homes built after 1990, the roof space is already there, the duct layout exists, and if you’re replacing a gas ducted heater, most of the structural work is already done. Whole-home zoning becomes practical rather than a selling point.

Split systems make more sense in older brick veneers where there’s no roof access, rentals being upgraded room by room, or a single living area carrying most of the load. Not every home needs ducts to be comfortable.

Heating and Cooling Services Across Canberra

Whether you need a quick fix or a full system upgrade, our expert Canberra electricians have got you covered. From air conditioning installations to prompt repairs and routine maintenance, we provide efficient, reliable solutions for year-round comfort.

Ducted Reverse Cycle Installation

New builds, gas-to-electric replacements, or homes with existing duct layouts. Sized, wired, and commissioned to AS/NZS 3000.

Gas Ducted Heater Replacement

Swap an ageing gas ducted system for reverse-cycle electric. Existing roof space and duct runs are used where they're still sound.

Commercial Climate Control

Office, warehouse, or retail, system selection, electrical supply, and installation are handled by the same crew from quote to commission.

Split System Installation

Single-zone or multi-head installs for older homes, rentals, or rooms a ducted system won't reach without major work.

Heating and Cooling Repairs

Electrical faults, tripped circuits, failed capacitors. We diagnose what's actually wrong before a replacement gets mentioned.

Energy-Efficient Upgrades

Resistive heating and ageing split systems were replaced with modern reverse cycle units. Worth checking if you qualify for the ACT Sustainable Household Scheme before you commit to a system.

Not Sure Which System Suits Your Home? Talk It Through First.

Most Canberra homes have a clear answer once you know what to look for, duct access, circuit capacity, and floor plan. A quick phone call with one of our licensed electricians usually narrows it down fast.

Replacing Gas Ducted Heating with Ducted Reverse Cycle Air Conditioning

In most Canberra homes, the existing duct layout stays. What changes is everything mechanical: the outdoor compressor, indoor fan coil unit, and controller replace the gas heater and flue. If the household is moving fully electric, the gas line goes too.

The switchboard is where this job gets electrical. A 10–14kW ducted reverse cycle system draws significant current, and older Canberra boards, particularly in pre-2000 homes, often need a capacity assessment before installation. A dedicated circuit is standard. Some boards need upgrading before the new system can be safely commissioned.

The existing ductwork gets checked at the same time. Degraded insulation and flattened flex duct are common in homes where the original gas system has been running for 20-plus years. Replacing the system without inspecting the ducts first is the kind of shortcut that shows up in the first Canberra winter.

What Affects the Cost of Ducted Reverse Cycle Air Conditioning in Canberra

Four things move the price: ductwork condition, switchboard capacity, zone controller complexity, and system tier. Sound existing ducts and a modern board keep costs down. Duct remediation, a switchboard upgrade, or a multi-zone controller each add to it, sometimes significantly. Brand tier shifts it further, mid-range units from Daikin or Mitsubishi sit in a different bracket to entry-level alternatives. ACT compliance work is quoted upfront, not added after.

Heating and Cooling Process in Canberra

How a Heating and Cooling Install Works With Us

Phone Consultation

Talk through your home, your current setup, and what's not working. We'll tell you what's realistic before anyone visits.

On-Site Assessment & Quote

We check ductwork condition, switchboard capacity, and circuit availability. Fixed quote before any work is scheduled.

Installation & Commissioning

Wired to AS/NZS 3000 and tested under load before commissioning. Site left clean before we're done.

What Makes Ducted Reverse Cycle Efficient in Canberra's Climate

Modern ducted systems run DC inverter compressors and variable-speed fans. Output modulates with demand instead of cycling at full draw, which in Canberra’s temperature range is the difference between a system that holds temperature and one that spends the morning catching up.

Why Heating and Cooling Installation Needs a Licensed Electrician

Reverse cycle systems aren’t just appliances, they’re hardwired into your switchboard, require dedicated circuits, and in the ACT must be installed by a licensed electrician. Getting the electrical side wrong affects both safety and warranty. It’s not a grey area.
Our commitment to quality and customer satisfaction speaks for itself.

Our Testimonials

. Here’s what our clients have to say about their experience with our trusted and reliable services.

Heating and Cooling Canberra: Frequently Asked Questions

Modern reverse cycle systems are rated to operate efficiently down to around -15°C ambient, Canberra winters don't come close to that ceiling. The technology has moved significantly in the last decade. A correctly sized ducted reverse cycle system handles a Canberra winter without the output drop older units were known for. Cold climate performance is no longer the concern it was.
In most Canberra homes, reverse cycle heating runs cheaper than ducted gas once you account for how inverter compressors work, they move heat rather than generate it, which means roughly 3–4 units of heat output per unit of electricity consumed. Gas prices in the ACT have also risen steadily. The gap varies by usage pattern and system age, but reverse cycle generally wins on running cost over a full heating season.
Sizing depends mostly on floor area and how well the home holds heat, ceiling height and insulation matter too, but those two drive the number. In a well-insulated Canberra home, 1–1.5kW per 10m² of conditioned space is a reasonable starting point. Canberra's climate zone means the cost of undersizing shows up fast. A figure quoted without seeing the home is usually optimistic.
Usually yes, but with conditions. Most duct layouts from post-1990 Canberra homes are compatible with reverse cycle fan coil units. The question is duct condition, insulation degradation and flattened flex sections are common in systems that have been running for 20-plus years. A duct inspection before installation determines what stays and what needs attention before the new system goes in.
The ACT Sustainable Household Scheme offers interest-free loans for eligible upgrades including reverse cycle heating and cooling. Owner-occupiers of an ACT property are generally eligible under current scheme criteria. Eligibility and loan limits have shifted as the scheme has evolved, checking directly with ActewAGL or Access Canberra gives you the current position before you commit to a system.

Talk to a Canberra Electrician About Your Heating and Cooling Options

Most people know what’s not working, the system that can’t keep up in July, the gas heater that’s been patched twice already, the power bills that don’t match what was promised. A phone call usually clarifies what the right system is, what the install actually involves, and what it’s likely to cost.